|
Post by MasterKill on Mar 1, 2009 11:31:06 GMT
Hello again! I have a kewl map idee But I failed at making it work. Ok how I want it to work: I make a sort of pipe go up, like an elevator, with an opening at the bottom and one at the top, for in and out. So, with this push up elevator you can only go up. But, the problem is, Idk how to de the push up part! I've been busy for hours with trigger_push and trigger_wind, but I can't make it work. Can you please tell me how to fix this? cause I still think I need one of the two things for it. Give a solution please! thanks! extra image for the idee: it should get pushed up from A to B
|
|
|
Post by 3kliksphilip on Mar 1, 2009 14:30:05 GMT
You mean it isn't actually an elevator, but more of a wind tunnel?
trigger_push should do, be sure to set its direction to UP and make its strength 100 and mess about with it from there. It's a case of getting the values right.
|
|
|
Post by MasterKill on Mar 1, 2009 15:49:57 GMT
You mean it isn't actually an elevator, but more of a wind tunnel? trigger_push should do, be sure to set its direction to UP and make its strength 100 and mess about with it from there. It's a case of getting the values right. Pff, I hade to change the strength to 1000 to make it work, took me a while to find that out
|
|