Gin
Pro Trained Noob
Posts: 41
|
Post by Gin on Sept 11, 2008 1:39:29 GMT
So... i need like smoke on my map... i don't want peoples to see the whole map and i can't figure out how to get the fog_controller to work... i want it on the whole map... but i can't get it to work..
|
|
|
Post by Rusty on Sept 11, 2008 13:43:19 GMT
More explination means more help, I'll tell you how your'e sposed to do it although I dont really understand your problem.
1: Make the fog controller entity (floating in mid air) 2: Change the keyvalue "Fog Enable" to Yes 3: adjust your fog setting how you see fit, remember all measurements in hammer are done in inches. make sure the density is set to 0.1 or above, depending on how you want the fog to look.
This should be in your normal skybox, if you're trying to make 3dskybox fog you have to do that from the "sky_camera" entity.
- Rusty
|
|
|
Post by 3kliksphilip on Sept 11, 2008 17:03:16 GMT
In the fogcontroller's options....
Fog Enable YES
|
|
Gin
Pro Trained Noob
Posts: 41
|
Post by Gin on Sept 11, 2008 23:32:06 GMT
Ok it worked. thanks.
|
|